Flying through

Wednesday, 25 September 2013

HeliTech @ Excel

AgustaWestland AW139 from SA
Day one and two at HeliTech 2013. The new venue is Excel, which is certainly easier to get to, but does have some disadvantages - notably that private pilots (indeed most pilots) cannot fly in.

There are some good things. I have been visited by many subscribers and friends - have chatted to many potential advertisers and subscribers, and there are some good machines here - like the AW139 left. But is does lack the buzz of HeliTech Duxford, and indeed HeliExpo. Hard to say why - might be the lack of outside air and flying helicopters.

Next year will be in Amsterdam. I've said I will go, but who knows how good that will be - I just hope there is room for some actual flying.

EC130T2
Bell has a B429 at the show, it is flying in and out of the car park and doing flights with potential customers down to Rochester and back. The other helicopters seem to be static only, which is a pity.

For the future Bell are excited that the JetRanger Lite is getting a LOT of interest. Gary Slater, the UK distributor, says that if he could already take deposits he would be rolling in it! I, like everyone else, am really looking forward to seeing the new machine.

Eurocopter has the T2s, both EC130T2 and EC145T2 are at the show. There have been a few problems with them, so no chance to fly them at the moment.

Sikorsky is also at the show. No Enstrom though, or Robinson, but a showing from Cabri, with a Swedish Guimbal on static display.

PremiAir has relaunched as a corporate charter company. The new MD was also trying to convince a skeptical press that Blackbushe is the new West London Heliport. Humm. I live in West London and it takes me an hour to drive to Blackbushe- work it out for yourself! At least Oxford London offers you a helicopter flight into Battersea.

More tomorrow.

Tuesday, 17 September 2013

LPCs or now PCs

Bell 206
Wonderful couple of days doing proficiency checks - what used to be called LPCs but now, with the EASA regulations, has changed its name to something more confusing. Normal!

First did a couple of JetRanger PCs in Kent, wonderful flying weather, and both guys flew very well.

Two days later down in Dorset. Very windy and wonderfully eccentric places to fly from, which made it very exciting. We came in and out of some very small yards - at least one of which was for engineering.

Then if was a bit of H300 flying - the wind blew us around a little, but those little Schweizers are wonderous tough, and we had a lovely flight once the rain had blown through.

Another 300 flight tomorrow, weather permitting, and then should be a 500 on Friday - once again depending on the weather.


Thursday, 11 July 2013

Rotorway Roughnecks Fly-in

Went to a private site near Rochester (the home of Kevin Longhurst) for a Rotorway fly-in for an article in Helicopter Life.  Four very different Rotorways flew in, with five (six including Jonathon Ball of the Rotorway Brothers) pilots.
Fascinating. These were two Rotorway 162s (Kevin and Paul Vaughan) one Rotorway 90 (Ian Brown) and one Rotorway 162E modified (Bruce Alexander) - that is with a Talon engine and a very other differences.
While the machines were basically the same, the also had their own unique due to the uniqueness of the builders.

There are also some differences between Rotorways and more conventional helicopters. One is that the engine is watercooler. While car manufacturers are aware that water cooling an engine is more efficient, usually in aviation the weight of the water is sufficient to make air cooling the preferred method.

Other differences include the start-up, in which the collective is raised, to make the blades neutral pitch,
and 1.5 Manifold Pressure put on the gauge (eighth of an inch of throttle) which helps ease the engine-blade relationship; another is a weight (25 - 33 lbs) which is placed on the front skid if the pilot flies solo, or on a back shaft (under the start of the tail boom) if there are two in the cockpit.
More in Helicopter Life Autumn issue, but it was a very enjoyable day flying the machines and very instructive. I like the Rotorway and I was impressed what a nice fun group they have there, all of whom clearly love flying and in particular love flying the Rotorway.

Tuesday, 2 July 2013

500 Training

Tomas Sorenson and GCCUO
So, the eight days of training on the H369 G-CCUO is now finished and the helicopter returned to HalfPenny Green alias Wolverhampton. It has been an interesting and successful week, with experiments with the rpm, with autos, with tail rotor failures - both in flight and in the hover. We have looked at both normal flight and emergencies, navigation and airfield work. It has been a thorough test of the possibilities available to the helicopter.
We now know this one weighs 1571 lbs and that that gives it a lot of carrying power given that the all up weight is 3000 lbs. This is not always true of H369s - which, although always powerful, are often carrying more basic weight because they have auxillary tanks or more instruments etc. G-CCUO is a light machine, and therefore, perhaps, more suitable for training and rental.
Gee and G-CCUO
Tomas is now back to Kenya, back to working on getting his own machine (now beautifully painted by Edmondson) to Kenya, either via an American N reg or thanks to Kenyan inspectors who come here to the UK to certify it for the Kenyan register.
His future is now with flying in Kenya. I hope the training he had here works well for him.

Sunday, 30 June 2013

Autorotations and confined areas in H369

We were attempting to see if we could change the autorotation characteristics of the H369, by varying the speed and RPM.
In the manual it says:
"to reduce the rate of descent or extend the gliding distance, operate at minimum rpm - maintain rotor between 420 and 523 by use of collective control."
To do this, and to keep the engine from coming back in (which would mean you return to powered flight) you must close the throttle to idle. Then you can play with collective pitch.

It also explains: - rotor rpm is 485 + 5rpm at 2250 lbs, sea level and 60 knots.
Rotor speed will decrease 10 rpm for every 100 lb reduction in gross weight and increase 6.5 rpm for each 1000 foot in DA (density altitude).

We started with autorotations at 60- 80 knots and full down collective, rpm around 523. The rate of descent was between 1500 fpm and 2000 fpm - ie fast . The we began varying the RPM.

We were at sea level and the temperature was around 20 degrees C. We could change the speed easily, but even raising the collective quite significantly kept the rpm around 490, it did not seem keep to go lower. However, at 490 rpm, assuming the VSI and altimeter were fairly accurate, we were losing less than 500 fpm, as we glided around and almost seemed to hover.
Changing the rpm, even from 520 (we cannot tell 3 rpm) to 490 (30 rpm) had a huge effect on the rate of descent.

Teaching on the H369/MD500

G & GCCUO at Oxford
Had a very interesting training day, today.
First, when we were doing the pre-start checks there was no 'clicking' sound from the automatic relight, which seem to indicate it was not working. I rang an engineer to find out why this would happen - but he was at Silverstone awaiting the Grand Prix - so busy. Tomas got out and went back to the engine bay, to check if he could see anything loose. Nothing obvious.
We decided to start up and hover for a while anyway - should we have any problems we would only be in the hover.
We started up, and taxied out - called immediately by the tower - our engine bay canopy was open and flapping. Stop and fix.
I jumped out and fastened it. Shows two things: one, that it cannot be seen from the instructor's seat, and two, that it is very easy to forget to do things when you get distracted.
Having fastened the canopy, I got back in the cockpit and called the tower that it was done. However, they said - no - shut down it must be properly checked. I agreed and we did so.
After we had shut-down the Airfield Manager came over. Taking off without properly closing the canopy is an MO (Minor incident?) and thus must be logged and properly checked in case the hinges had been affected. I checked them, they were OK, we had not, after all, taxied very far. No problem.

When we did our pre-start-up checks the automatic relight clicking was working again, so probably it is a bit like recycling your computer!
Then, we did a hot-engine start-up - good practice for Tomas. Here, because the engine is already around 350 degrees C, you must reduce the TOT to before 150 degrees C before putting in the fuel, to avoid a hot engine-start.
You understand the difference - one we are talking of a pre-start engine heat of about 350 degrees C, the other is what you want to avoid, the engine temperature going over 810 degrees centigrade for 10 seconds, and even more over 927 degrees C for more than a second.
When you do see the temperature heading up there (usually when there is a low powered or faulty battery) it does make your heart pump!
Started up without incident, and flew away for some more autorotation and confined area practice.


Thursday, 27 June 2013

Flying in Devon, UK

Flying Egg in Devon, Swimbridge
Does no one in Devon fly? Or is it that they do not fly low level? Airbox 250 maps stop at Axminster and thereafter have a vaguely dismissive green colour - flying be not done here where the non-wings live, oh ah - ! I tried to get a Map7 (as it is called) at Goodwood but they didn't have one. So, I thought, well I'll get one in Exeter, since we are going there for fuel, they are bound to have one.
No!
But although they did not have an uptodate one, they did have a 2011 one, and gave it to me for free. So, thanks, that was very kind and even though Plymouth no longer has an airport... it was very useful.

Great place to fly Devon. I can't imagine why everyone isn't flying there - it was brilliant, uncrowded and absolutely beautiful. And nice place to practice sloping ground landings for real. This picture shows the least sloping part of the whole local area!